VL-SWD272 / VL-SVD272
Home > Business Product > Telecommunication System > Video Intercom System > VL-SWD272 / VL-SVD272
VL-SWD272 / VL-SVD272
Up to 6 additional monitors can be connected to the main monitor using a combination of 7-inch wired monitors and 2.2-inch wireless monitors (However, the maximum possible number of 7-inch wire monitors is 3).
- Highly Expandable.
- Wireless Monitor.
- 7-inch Screen:
- Voice Change Function.
- Electric Lock Release Support for Gate.
- Picture Recording Function.
- Night Vision with LED lights (illumination lamp).
| Model composition | Main Monitor (VL-MWD272) x1, Door Station (VL-V522L) x1, Wireless monitor (VL-WD613) x 1 | |
| Optional Accessories | Wireless Monitor | VL-WD613 (1 included with VL-SWD272) |
| Door Station | VL-V522L (1 included with VL-SWD272) | |
| Monitor | VL-MD613 (1 included with VL-SWD272) | |
| Repeater | VL-FKD2 | |
| Maximum Connectable Units | Wireless Monitor | UP to 6 (1 included with VL-SWD501) |
| Wireless Monitor | *A total of up to 6 wireless sub monitors and extension monitors can be registered. | |
| Door Station | UP to 2 (1 included with VL-SWD272) | |
| Monitor | UP to 3 (not including main monitor) | |
| Monitor | *A total of up to 6 wireless sub monitors and extension monitors can be registered. | |
| Connectable Devices | Electric Lock Release Support | UP to 2 (user supplied) |
| Repeater | UP to 2 (sold separately) | |
| PBX | Only Panasonic PBX | |
| Convenience | Picture Recording | Internal memory: Up to 50 visitors/sessions (up to 8 still images per visitor/session) |
| Night Vision | Yes (Warm white LED lights, Infrared LEDs) | |
| Touch Panel / Pan & Tilt | – / Yes | |
| Voice Changer | Yes (only from the main monitor) | |
| Intercom call | Intercom Call (between main monitor, sub monitor and extension monitor) | |
| Monitor | Power source | 100 – 240 V AC, 50/60 Hz |
| Power consumption | Standby : approx. 2.5W | |
| Power consumption | During operation : approx. 10W | |
| Dimensions (H x W x D) | Approx. 158 x 243 x 29.5 (mm) | |
| Mass (weight) | Approx.825g (including mounting bracket & AC cable) | |
| Mass (weight) | * The weight of the AC cable differs depending on the region. | |
| Operating environment | Ambient temperature : 0℃ to + 40 ℃, Up to 90 % RH (Relative Humidity) non condensing | |
| Display size | 7-inch, wide color / WVGA (800 x 480 pixcels) | |
| Display language | English, Arabic | |
| Talking method | Hands-free | |
| Installation method | Wall mount (mounting bracket supplied) | |
| Frequency range | 1.88 GHz to 1.90 GHz | |
| External material | ABS | |
| Door Station | Power source | Supplied by the Main Monitor Station |
| Dimensions (H x W x D) | Approx. 131 x 99 x 36.5 (mm) *Excluding protruding sections | |
| Mass (weight) | Approx. 200 g | |
| Operating environment | Ambient temperature: Approx. -15 °C to +55 °C, Up to 90 % RH (Relative Humidity) non condensing | |
| Operating environment | (tested up to -20 °C) | |
| Viewing angle | Horizontally: Approx. 87 degree, Vertically: Approx. 66 degree | |
| Installation method | Surface mount (mounting base supplied) | |
| Image sensor/ Camera (pixel) | CMOS sensor (Approx. 0.3M pixels) | |
| Minimum illuminance required | 1 lx (within approx. 50 cm from the camera lens) | |
| Lighting method | Warm white LED lights, Infrared LEDs | |
| IP rating (INGRESS PROTECTION) | IPX3 *Water resistance is only assured if the doorphone is installed correctly according to the instructions in the Installation Guide, and appropriate water protection measures are taken. | |
| External material | Flame retardant PC+ABS resin, Flame retardant ABS resin | |
| Wireless Monitor | Power source | Rechargeable Ni-MH (AAA x 2) |
| Dimensions (H x W x D) | Approx. 173 x 52 x 30 (mm) *Excluding protruding sections | |
| Mass (weight) | Approx. 160 g (including the batteries) | |
| Operating environment | Ambient temperature: 0 °C to +40 °C, Up to 90 % RH (Relative Humidity) non condensing | |
| Display | 2.2-inch colour / QVGA (320 x 240 pixels) | |
| Frequency | 1.88 GHz to 1.90 GHz | |
| External material | ABS resin | |
| Operating time | Standby use: approx. 80 hours *When used fully charged in an operating temperature of 20 °C. | |
| Charging time | Approx. 8 hours *When the operating temperature is 20 °C. The charging time may increase when the operating temperature is lower than this. | |
| Transmitting range | Approx. 100 m (line-of-sight distance from the main monitor) | |
| Charger | Power source | AC adaptor (PNLV226) |
| Power source | Input: 220-240 V AC, 0.1 A, 50/60 Hz, Output: 5.5 V DC, 0.5 A | |
| Power consumption | Standby: Approx. 0.4 W (when the sub monitor is not placed in the charger) | |
| Power consumption | During charging: Approx. 1.4 W | |
| Dimensions (H x W x D) | Approx. 43 x 81 x 76 (mm) *Excluding protruding sections | |
| Mass (weight) | Approx. 70 g (excluding the AC adaptor) | |
| Operating environment | 0 °C to +40 °C, Up to 90 % RH (Relative Humidity) non condensing | |
| External material | ABS resin | |
WhatsApp us