PT-DZ10K
Home > Business Product > Professional Display System > Projector > Large-Venue > PT-DZ10K
PT-DZ10K
Large-Venue Projector
Compact 12000 lumens-class Projector. Designed for events and staging applications.
Our innovative dual-lamp system, with its new lamp, helps to make this body compact while providing a full 12,000lm of brightness, with 220-240V AC operation. When in ‘Lamp Relay’ mode, the system also eliminates any interruptions if a lamp should fail and enables 24/7 projection.
The projector’s Dynamic Iris feature uses a scene-linking aperture mechanism to achieve a remarkable 10,000:1 contrast without lowering its high brightness. This helps to reproduce deeper, richer blacks, and provides images with more detailed textures.
An integrated Eco Filter combines with the dust-resistant cabinet to allow long-term use in harsh conditions, while a maintenance cycle of up to 12,000 hours reduces the time and cost of repair.
- 3-chip DLP, 10600 lumens, WUXGA
- High brightness and high contrast ratio makes bright, crisp and sharp image
- Dual lamp system with Lamp Relay mode enables 24/7 operation
- 10,000:1 contrast ratio
- Edge blending function and colour matching
| Power supply | 120 V AC, 9 A, 50/60 Hz; 220-240 V AC, 4.7 A, 50/60 Hz |
| Power Consumption (120V AC, 50/60Hz) | 925 W (1,010 VA) (0.2 W with standby mode set to eco. 6 W with standby mode set to normal. Both with fan stopped.) |
| Power Consumption (220-240V AC, 50/60Hz) | 900 W (980 VA) (0.3 W with standby mode set to eco. 9 W with standby mode set to normal. Both with fan stopped.) |
| DLP™ chip Panel size | 24.4 mm (0.96 inches) diagonal (16:10 aspect ratio) |
| DLP™ chip Display method | DLP™ chip x 3 (R, G, B), DLP™ projection system |
| DLP™ chip Pixels | 2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels |
| LENS | Optional powered zoom/focus lenses |
| Lamp | 355 W UHM lamps (x 2) (dual lamp, normal mode) |
| Screen size | 1.78-25.4 m (70-1,000 inches) (1.78-15.24 m (70-600 inches) with the ET-D75LE8), 16:10 aspect ratio |
| Brightness | 10,600 lumens (dual lamp, normal mode) |
| Center-to-corner uniformity | 90% |
| Contrast | 10,000:1 (full on/full off, in dynamic iris 3 mode) |
| Resolution | 1,920 x 1,200 pixels |
| Scanning Frequency (SDI) | 3G-SDI signal (RGB 4:4:4 12-bit/10-bit): SMPTE ST 424 compliant: 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p; 3G-SDI signal (YPBPR 4:2:2 10-bit): SMPTE ST 424 compliant: 1125(1080)/60p, 1125(1080)/50p; HD-SDI signal (YPBPR 4:2:2 10-bit): SMPTE ST 292 compliant: 750(720)/60p, 750(720)/50p, 1125(1035)/60i, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p; SD-SDI signal (YCBCR 4:2:2 10-bit): SMPTE ST 259 compliant: 525i(480i), 625i(576i) |
| Scanning Frequency (HDMI/DVI-D/RGB) | Horizontal: 15 kHz-100 kHz, vertical: 24 Hz – 120 Hz, dot clock: 25 -162 MHz or lower (HDMI/DVI: 25 MHz – 162 MHz) |
| Scanning frequency YPBPR (YCBCR) | 525i(480i): fH 15.75 kHz; fV 60 Hz, 625i(576i): fH 15.63 kHz; fV 50 Hz, 525p(480p): fH 31.50 kHz; fV 60 Hz, 625p(576p): fH 31.25 kHz; fV 50 Hz, 750(720)/60p: fH 45.00 kHz; fV 60 Hz, 750(720)/50p: fH 37.50 kHz; fV 50 Hz, 1125(1035)/60i: fH 33.75 kHz; fV 60 Hz, 1125(1080)/60i: fH 33.75 kHz; fV 60 Hz, 1125(1080)/50i: fH 28.13 kHz; fV 50 Hz, 1125(1080)/25p: fH 28.13 kHz; fV 25 Hz, 1125(1080)/24p: fH 27.00 kHz; fV 24 Hz, 1125(1080)/24sF: fH 27.00 kHz; fV 48 Hz, 1125(1080)/30p: fH 33.75 kHz; fV 30 Hz, 1125(1080)/60p: fH 67.50 kHz; fV 60 Hz, 1125(1080)/50p: fH 56.25 kHz; fV 50 Hz |
| Scanning Frequency (Video/S-Video) | fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60] fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] |
| Optical axis shift Vertical | ±55% (±44% with the ET-D75LE6) from center of screen, powered; NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50. |
| Optical axis shift Horizontal | ±20% (±15% with the ET-D75LE6) from center of screen, powered; NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50. |
| Keystone correction range | Vertical ±40°, Horizontal ±15°(vertical ±22° and horizontal ±15° with the ET-D75LE5/LE50, vertical ±28° and horizontal ±15° with the ET-D75LE6) When using only the KEYSTONE correction of the Geometric Adjustment function: Vertical ±40°, horizontal ±15° |
| Installation | Ceiling/floor, front/rear |
| Terminals SDI IN | BNC x 1, 3G-SDI signal: SMPTE ST 424 compliant; HD-SDI signal: SMPTE ST 292 compliant; SD-SDI signal: SMPTE ST 259 compliant |
| Terminals HDMI IN | HDMI 19-pin x 1, Deep Color, compatible with HDCP,525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) – WUXGA(1,920 x 1,200), dot clock: 25 MHz -162 MHz; NOTE: Compatible with non-interlaced signals only. |
| Terminals DVI-D IN | DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) – WUXGA(1,920 x 1,200), dot clock: 25 MHz -162 MHz; NOTE: Compatible with non-interlaced signals only. |
| Terminals RGB 1 IN | BNC x 5 |
| Terminals RGB 1 IN R, G, B | R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals. |
| Terminals RGB 1 IN Y, PB, PR (Y, CB, CR) | Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms |
| Terminals RGB 1 IN S-Video signal | Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms |
| Terminals RGB 2 IN | D-sub HD 15-pin (female) x 1 |
| Terminals RGB 2 IN R, G, B | R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals. |
| Terminals RGB 2 IN Y, PB, PR (Y, CB, CR) | Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms |
| Terminals VIDEO IN | BNC x 1, 1.0 Vp-p, 75 ohms |
| Terminals SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| Terminals SERIAL OUT | D-sub 9-pin (male) x 1 for link control(RS-232C compliant) |
| Terminals Remoter 1 In | M3 jack x 1 for wired remote control |
| Terminals Remoter 1 Out | M3 jack x 1 for link control |
| Terminals Remoter 2 In | D-sub 9-pin x 1 for external control (parallel) |
| Terminals LAN | RJ-45 x 1 for network connection, 100Base-TX/10Base-T, compliant with PJLink™ (class 1) |
| Power cord length | 3.0 m (9 ft 10 in) |
| Cabinet materials | Molded plastic |
| Dimensions (W x H x D) | 530 x 200 x 548.5 mm (20-7/8 x 7-7/8 x 21-19/32 inches) (without lens) |
| Weight | 24 kg (52.9 lbs) (without lens) |
| Operation noise | 43 dB (normal mode), 37 dB (eco mode) |
| Operating temperature | 0℃ – 45℃ (32℉ – 113℉) |
| Operating humidity | 10% – 80% (no condensation) |
| Technology | 3-Chip DLP |
WhatsApp us