PT-DW17K

Home > Business Product > Professional Display System > Projector > Large-Venue > PT-DW17K

PT-DW17K

Large-Venue Projector

Compact 20000 lumens-class Projector Flagship model delivering spellbinding picture quality for events and staging.

The Panasonic PT-DW17K with a brightness of 20000 ANSI Lumen offers a very high light output. 20000 ANSI Lumen are plenty for projections at large conferences, expos, fairs and outdoors. The Panasonic PT-DW17K thus plays in the ‘event-league’ and is designed for public screenings, permanent installations and long-term usage. With its 20000 ANSI Lumen it is multiple times brighter than a ‘normal’ home-cinema or office projector.

Vibrant images through a very high contrast ratio of 10000:1 and a rich brightness of are key features of this high-end projector. The high contrast makes it the best choice for film projections or applications that require a high colour fidelity.

Download Specification Enquiry Now

Features

3-chip DLP, 17000 lumens, WXGA
Compact design, light weight and low noise level (as low as 46db)
Quad-lamp redundancy for failsafe operation
Fully featured for single or multi-mapping installations

Specification

Brightness	17,000 lumens (four lamp)
Resolution	1,366 x 768 pixels (Input signals that exceed this resolution converted to 1,366 x 768 pixels.)
Lamp	432 W UHM lamps (x 4) (four lamp system)
Power supply	200 – 240 V AC, 12 A , 50/60 Hz ( 3-wire single-phase)
Power consumption	2,060 W (2,100 VA) (0.3 W with STANDBY MODE set to ECO. 9 W with STANDBY MODE set to NORMAL.), max. 7,031 BTU ( without light o utput: 6,758 BTU )
DLP™ chip \| Panel size	21.6 mm (0.85 inches) diagonal (16:9 aspect ratio)
DLP™ chip \| Display method	DLP™ chip x 3 ( R, G, B), DLP™ projection system
DLP™ chip \| Pixels	1,049,088 (1,366 x 768) x 3, total of 3,147,264 pixels
LENS	Optional powered zoom/focus lenses
Screen size	1.78-25.4 m (70-1,000 inches) (1.78-15.24 m (70-600 inches) with the ET-D75LE8), 16:9 aspect ratio
Center-to-corner uniformity	90%
Contrast	10,000:1 (full on/full off, in dynamic iris 3 mode)
Scanning frequency \| HDMI/DVI-D/DIGITAL LINK	Horizontal: 15-100 kHz, vertical: 24-120 Hz, dot clock: 25-162 MHz
Scanning frequency \| RGB	Horizontal: 15-100 kHz, vertical: 24-120 Hz, dot clock: 162 MHz or less
Scanning frequency \| YPBPR (YCBCR)	480i (525i): f H 15.73 kHz; fV 59.94 Hz, 576i (625i): f H 15.63 kHz; fV 50 Hz, 480p (525p): fH 31.47 kHz; fV 59.94 Hz, 576p (625p): fH 31.25 kHz; fV 50 Hz, 720 (750)/60p: fH 45.00 kHz; fV 60 Hz, 720 (750)/50p: fH 37.50 kHz; fV 50 Hz, 1035/60i: fH 33.75 kHz; fV 60 Hz, 1080 (1125)/60i: fH 33.75 kHz; fV 60 Hz, 1080 (1125)/50i: fH 28.13 kHz; fV 50 Hz, 1080/25p: fH 28.13 kHz; fV 25 Hz, 1080/24p: fH 27.00 kHz; fV 24 Hz, 1080/24sF: fH 27.00 kHz; fV 48 H z, 1080/30p: fH 33.75 kHz; fV 30 Hz, 1080/60p: fH 67.50 kHz; fV 60 Hz, 1080/50p: fH 56.25 kHz; fV 50 Hz
Scanning frequency \| Video/Y/C	fH: 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60] fH: 15.63 kHz, fV: 50 H z [PAL/PAL-N/SECAM]
Optical axis shift \| Vertical	±70% (±60% with the ET-D75LE6, +78-+96% with the ET-D75LE90) from center of screen, powered
Optical axis shift \| Horizontal	±30% (±20% with the ET-D75LE6, -13-+27% with the ET-D75LE90) from center of screen, powered NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.
Keystone correction range	Vertical : ±40° (±22° with the ET-D75LE50, ±28° with the ET-D75LE6, +5° with the ET-D75LE90), horizontal: ±15°
Installation	Ceiling/floor, front/rear
Terminals \| HDMI IN	HDMI 19-pin x 1, Deep Color, compatible with HDCP
Terminals \| DVI-D IN	DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only
Terminals \| DIGITAL LINK/LAN	RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink,100base-tx, Art-Net compatible Deep Color, compatible with HDCP
Terminals \| RGB 1 IN	BNC x 5
Terminals \| RGB 1 IN \| R, G, B	R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals \| RGB 1 IN \| Y, PB, PR (Y, CB, CR)	Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals \| RGB 1 IN \| S-Video signal	Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
Terminals \| RGB 2 IN	D-sub HD 15-pin (female) x 1
Terminals \| RGB 2 IN \| R, G, B	R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals \| RGB 2 IN \| Y, PB, PR (Y, CB, CR)	Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals \| SERIAL IN	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals \| SERIAL OUT	D-sub 9-pin (male) x 1 for link control
Terminals \| Remoter 1 In	M3 jack x 1 for wired remote control
Terminals \| Remoter 1 Out	M3 jack x 1 for link control
Terminals \| Remoter 2 In	D-sub 9-pin (female) x 1 for external control (parallel)
Power cord length	3.0 m (9 ft 10 in)
Cabinet materials	Molded plastic
Dimensions (W x H x D)	620 x 291 x 800 mm (24-7/16 x 11-15/32 x 31-1/2 inches) (without lens)
Weight	Approx. 41 kg (90.4 lbs) (without lens)
Operating noise	46 dB (quad lamp operation)
Operating temperature	0°- 45°C (32°- 113°F)
Operating humidity	10%-80% (no condensation)
Technology	3-chip DLP