PT-DS20K

Home > Business Product > Professional Display System > Projector > Large-Venue > PT-DS20K

PT-DS20K

Large-Venue Projector

Compact 20000 lumens-class Projector Flagship model delivering spellbinding picture quality for events and staging.

The Panasonic PT-DS20K with a brightness of 20000 ANSI Lumen offers a very high light output. 20000 ANSI Lumen are plenty for projections at large conferences, expos, fairs and outdoors. The Panasonic PT-DS20K thus plays in the ‘event-league’ and is designed for public screenings, permanent installations and long-term usage. With its 20000 ANSI Lumen it is multiple times brighter than a ‘normal’ home-cinema or office projector.

Vibrant images through a very high contrast ratio of 10000:1 and a rich brightness of are key features of this high-end projector. The high contrast makes it the best choice for film projections or applications that require a high colour fidelity.

Download Specification Enquiry Now

Features

3-chip DLP, 20000 lumens, SXGA+
120Hz high frame rate for superb and sharp motion pictures
Compact design, light weight and low noise level (as low as 46db)
Quad-lamp redundancy for failsafe operation
Fully featured for single or multi-mapping installations

Specification

Brightness	20,000 lumens (four lamp)
Resolution	1,920 x 1,200 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,200 pixels.)
Technology	3-Chip DLP
Power supply	200 – 240 V AC, 12 A, 50/60 Hz (3-wire single-phase)
Power consumption	2,060 W (2,100 VA) (0.3 W with STANDBY MODE set to ECO. 9 W with STANDBY MODE set to NORMAL.), max. 7,031 BTU (without light output: 6,758 BTU )
DLP™ chip \| Panel size	24.4 mm (0.96 inches) diagonal (16:10 aspect ratio)
DLP™ chip \| Display method	DLP™ chip x 3 (R, G, B), DLP™ projection system
DLP™ chip \| Pixels	2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels
LENS	Optional powered zoom/focus lenses
Lamp	432 W UHM lamps (x 4) (four lamp system)
Screen size	1.78-25.4 m (70-1,000 inches) (1.78-15.24 m (70-600 inches) with the ET-D75LE8), 16:10 aspect ratio
Center-to-corner uniformity	90%
Contrast	10,000:1 (full on/full off, in dynamic iris 3 mode)
Scanning frequency \| SDI	Dual-link HD-SDI signal (RGB 4:4:4 12-bit/10-bit): SMPTE ST 372 compliant: 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p, 2048 x 1080/24p, 2048/1080/24sF Dual-link HD-SDI signal (X Y Z 4:4:4 12-bit): SMPTE ST 372 compliant: 2048 x 1080/24p, 2048 x 1080/24sF, 3G-SDI signal (RGB 4:4:4 12-bit/10-bit): SMPTE ST 424 compliant: 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p, 3G-SDI signal (YPBPR 4:2:2 10-bit): SMPTE ST 424 compliant: 1080/50p, 1080/60p, HD-SDI signal (YPBPR 4:2:2 10-bit): SMPTE ST 292 compliant: 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p, SD-SDI signal (YCBCR 4:2:2 10-bit): SMPTE ST 259 compliant: 480i, 576i
Scanning frequency \| HDMI/DVI-D/DIGITAL LINK	Horizontal: 15-100 kHz, vertical: 24-120 Hz, dot clock: 25-162 MHz
Scanning frequency \| RGB	Horizontal: 15-100 kHz, vertical: 24-120 Hz, dot clock: 162 MHz or less
Scanning frequency \| YPBPR (YCBCR)	480i (525i): fH 15.73 kHz; fV 59.94 Hz, 576i (625i): fH 15.63 kHz; fV 50 Hz, 480p (525p): fH 31.47 kHz; fV 59.94 Hz, 576p (625p): fH 31.25 kHz; fV 50 Hz, 720 (750)/60p: fH 45.00 kHz; fV 60 Hz, 720 (750)/50p: fH 37.50 kHz; fV 50 Hz, 1035/60i: fH 33.75 kHz; fV 60 Hz, 1080 (1125)/60i: fH 33.75 kHz; fV 60 Hz, 1080 (1125)/50i: fH 28.13 kHz; fV 50 Hz, 1080/25p: fH 28.13 kHz; fV 25 Hz, 1080/24p: fH 27.00 kHz; fV 24 Hz, 1080/24sF: fH 27.00 kHz; fV 48 Hz, 1080/30p: fH 33.75 kHz; fV 30 Hz, 1080/60p: fH 67.50 kHz; fV 60 Hz, 1080/50p: fH 56.25 kHz; fV 50 Hz
Scanning frequency \| Video/Y/C	fH: 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60] fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift \| Vertical	±55% (±44% with the ET-D75LE6, +73-+78% with the ET-D75LE90) from center of screen, powered
Optical axis shift \| Horizontal	±20% (±15% with the ET-D75LE6, ±6% with the ET-D75LE90) from center of screen, powered NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.
Keystone correction range	Vertical : ±40° (±22° with the ET-D75LE50, ±28° with the ET-D75LE6, +5° with the ET-D75LE90), horizontal: ±15°
Installation	Ceiling/floor, front/rear
Terminals \| SDI IN 1	BNC x 1, Dual-link 3G-SDI signal: SMPTE ST 425 compliant (Link 1) Dual-link HD-SDI signal: SMPTE ST 372 compliant (Link-A) 3G-SDI signal: SMPTE ST 424 compliant HD-SDI signal: SMPTE ST 292 compliant SD-SDI signal: SMPTE ST 259 compliant
Terminals \| SDI IN 2	BNC x 1, Dual-link 3G-SDI signal: SMPTE ST 425 compliant (Link 2) Dual-link HD-SDI signal: SMPTE ST 372 compliant (Link-B) 3G-SDI signal: SMPTE ST 424 compliant HD-SDI signal: SMPTE ST 292 compliant SD-SDI signal: SMPTE ST 259 compliant
Terminals \| HDMI IN	HDMI 19-pin x 1, Deep Color, compatible with HDCP
Terminals \| DVI-D IN	DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only
Terminals \| DIGITAL LINK/LAN	RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink,100base-tx, Art-Net compatible Deep Color, compatible with HDCP
Terminals \| RGB 1 IN	BNC x 5
Terminals \| RGB 1 IN \| R, G, B	R: 0.7 Vp-p, 75 o hms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals \| RGB 1 IN \| Y, PB, PR (Y, CB, CR)	Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals \| RGB 1 IN \| S-Video signal	Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
Terminals \| RGB 2 IN	D-sub HD 1 5-pin (female) x 1
Terminals \| RGB 2 IN \| R, G, B	R: 0.7 Vp-p, 75 o hms, G: 0.7 Vp-p ( G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Terminals \| RGB 2 IN \| Y, PB, PR (Y, CB, CR)	Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals \| 3D SYNC 1 IN/OUT	BNC x 1, 1.0 Vp-p, 75 ohms Input: TTL, high impedance. Output: TTL, max. 10 mA
Terminals \| 3D SYNC 2 OUT	BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA
Terminals \| SERIAL IN	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
Terminals \| SERIAL OUT	D-sub 9-pin (male) x 1 for link control
Terminals \| Remoter 1 In	M3 jack x 1 for wired remote control
Terminals \| Remoter 1 Out	M3 jack x 1 for link control
Terminals \| Remoter 2 In	D-sub 9-pin (female) x 1 for external control (parallel)
Power cord length	3.0 m (9 ft 10 in)
Cabinet materials	Molded plastic
Dimensions (W x H x D)	620 x 291 x 800 mm (24-7/16 x 11-15/32 x 31-1/2 inches) (without lens)
Weight	Approx. 41 kg (90.4 lbs) (without lens)
Operating noise	46 dB (quad lamp operation)
Operating temperature	0°- 45°C (32°- 113°F)
Operating humidity	10%-80% (no condensation)
Keystone Correction Range with Optional Upgrade Kit	Vertical: ±45° (±40° with the ET-D75LE10/ET-D75LE20, ±22° with the ET-D75LE50, ±28° with the ET-D75LE6), horizontal: ±40° (±15° with the ET-D75LE50/ET-D75LE6)