PT-DW530U WXGA Projector

The Panasonic PT-DW530U WXGA Projector is flexible and powerful enough to thrive in a variety of working conditions. With a brightness of 4000 Lumens and a contrast ratio of 2000:1, the PT-DW530U uses a single lamp and efficient focusing reflector to minimize consumption to only 415W. It has a widescreen aspect ratio and WXGA resolution of 1280 x 800 that are complimented by an increased functionality and a variety of features.

The PT-DW530U uses an RGB Booster to enhance color. It increases color brightness through Vivid Color Control technology. The lamp Modulation Drive System controls lamp intensity for each color. This optimizes light usage and obtains color balance without lowering brightness. The PT-DW530U also thrives in the daylight, by correcting image sharpness when projecting in light areas.

The PT-DW530U enjoys multiple input terminals, which enhance flexibility. There are HDMI and DVI-D inputs, as well as composite, RCA and S-video inputs. For network connection, the PT-DW530 has an RS-232 and RJ45 terminal. The RS-232 jack even has an Emulation feature that lets you replace an existing Panasonic projector on your network, without changing the control settings.

RGB Booster
The RGB Booster achieves high image quality with levels of color reproduction and brightness that make each color stand out. It combines Panasonic’s proprietary Vivid Color Control technology with a Lamp Modulation Drive System for a 1-chip DLP projector that produces bright and vivid colors
Vivid Color Control
This unique control technology optimizes the use of the color segment areas of the color wheel. It increases the brightness of each RGB color
Lamp Modulation Drive System
With the advanced lamp modulation technology, the projector is now able to control the lamp intensity for each of the red, green, blue and white segments of the color wheel separately. Because the actual light output is controlled in relation to each color segment, light usage is optimized and color balance is obtained without lowering the brightness. This results in bright, vivid images with increased color fidelity
Web Browser Control
This unit can be easily operated remotely over a LAN, because it is done using the computer’s Web browser. Furthermore, the projector sends an email message to notify the operator when an error has occurred, or a lamp needs to be replaced
Multi Projector Monitoring
Panasonic’s original freeware “Multi Projector Monitoring & Control Software Ver. 2” allows the user to control and monitor multiple projectors at the same time over a wired LAN. When a problem occurs, an alarm message is sent to the monitoring / controlling PC
Side-by-Side Function
You can simultaneously display images from two sources onto a single screen. For example, you can display a PC image on the left and a video image on the right. Taking advantage of the wide-screen projection, this function gives you a host of new application possibilities to explore
Multiple Terminals
Interfaces include a DVI-D and HDMI inputs. The serial terminal (RS-232C) has an Emulate function that lets you continue using existing control systems when replacing a previous Panasonic model. It is also possible to output audio during Standby mode. This is convenient when connecting an external audio system through the projector
H / V Lens Shift and 2 x Zoom Lens
The horizontal / vertical lens shift let you accommodate a wide range of room sizes and shapes. When replacing existing projectors, the 2 x zoom greatly enhances your ease of installation and can reduce costs by permitting the use of existing mounting positions and cabling
Detail Clarity Processor 3
The frequency of the video signal is analyzed for each scene, and distribution data is extracted for the ultra high, high, medium and low-range frequencies. High-precision detection is applied from 2-dimensional horizontal / vertical data to produce more natural, lifelike images with high definition
Optional Wireless Module
The optional Wireless Module (sold separately) lets you utilize wireless projection for a smooth, hassle-free presentation. You can make the settings for wireless connection quickly and easily using Wireless Manager ME 5.5 software. When the presentation is finished, Wireless Manager restores the PC to its previous LAN settings, so the PC is ready to reconnect to your LAN. Functions include Live mode and Multi-Live Mode. In Live mode, the image projected is identical to the image seen on the PC screen. In Multi-Live mode, you can wirelessly connect with multiple PCs
Daylight View
This function corrects the image quality to project sharp, clear images even in brightly lit rooms. A luminance sensor measures the ambient brightness, and a real-time adjustment function optimizes sharpness and brightness according to the surroundings
Flexible Angle Setting
The unit can be rotated 360° vertically. This means you can install it at any up-and-down angle you wish to accommodate different installation conditions
Cooling System
The cooling system has been updated. It optimizes the airflow inside the unit. As a result, it offers better cooling efficiency and allows the projector to be used in ambient temperatures up to 113° F (45° C)
Reduced Maintenance
The cooling system combines with a dust-resistant design based on a sealed optical block to achieve a lamp and lamp air filter replacement cycle of 2,000 hours. This greatly reduces maintenance hassles
Easy Lamp Replacement
You can replace the lamp from the rear. The lamp is easily replaced even after the projector is installed on the ceiling
Lens-Centered Design
A lens-centered, symmetrical design provides ease of installation, eliminating the need for any special considerations when planning the installation site
Rec. 709 Mode for HDTV Projection
Optimal color reproduction can be achieved by selecting this mode, compliant with ITU-R Recommendation BT.709, when images from an HDTV source are projected
PT-DW530
DLP™ chip Panel size 16.5 mm (0.65 inches) diagonal, 16:10 aspect ratio
Display method DLP™ chip x 1, DLP™ projection system
Pixels 1,024,000 (1,280 x 800) pixels
Lens Manual zoom (2x zoom), manual focus F 2.0-3.4, f 21.5-43.0 mm
Lamp 300 W (max. 310 W) UHM lamp
Screen size 1.02-7.62 m (40-300 inches), 16:10 aspect ratio
Brightness*1 4,000 lumens (lamp mode: NORMAL)
Center-to-corner uniformity*1 90%
Contrast*1 2,000:1 (full on/full off)
Resolution 1,280 x 800 pixels (Input signals that exceed this resolution will be
converted to 1,280 x 800 pixels.
Scanning frequency HDMI/DVI-D fH: 27 kHz-100 kHz, fV: 24 Hz-120 Hz, dot clock: 25 MHz-162 MHz
RGB fH: 15 kHz-100 kHz, fV: 24 Hz-120 Hz, dot clock: 162 MHz or lower
YPBPR (YCBCR) 480i (525i): fH 15.75 kHz; fV 60 Hz
576i (625i): fH 15.63 kHz; fV 50 Hz
480p (525p): fH 31.50 kHz; fV 60 Hz
576p (625p): fH 31.25 kHz; fV 50 Hz
720 (750)/60p: fH 45.00 kHz; fV 60 Hz
720 (750)/50p: fH 37.50 kHz; fV 50 Hz
1035/60i: fH 33.75 kHz; fV 60 Hz
1080 (1125)/60i: fH 33.75 kHz; fV 60 Hz
1080 (1125)/50i: fH 28.13 kHz; fV 50 Hz
1080/25p: fH 28.13 kHz; fV 25 Hz
1080/24p: fH 27.00 kHz; fV 24 Hz
1080/24sF: fH 27.00 kHz; fV 48 Hz
1080/30p: fH 33.75 kHz; fV 30 Hz
1080/60p: fH 67.50 kHz; fV 60 Hz
1080/50p: fH 56.25 kHz; fV 50 Hz
Video/S-Video fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60] fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift Vertical +70% from center of screen (manual)
Horizontal ±10% from center of screen (manual)
Keystone correction range Vertical ±40°
Installation Ceiling/floor, front/rear
Terminals HDMI IN HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 x 480) -WUXGA (1,920 x 1,200)*2; compatible with non-interlaced signals only; dot clock: 25-162 MHz
Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
DVI-D IN DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 x 480)-WUXGA (1,920 x 1,200)*2; compatible with non-interlaced signals only; dot clock: 25-162 MHz
RGB 1 IN BNC x 5 (RGB/ YPBPR x 1)
RGB 2 IN D-sub HD 15-pin (female) x 1 (RGB/ YPBPR x 1)
VIDEO IN BNC x 1 (composite video)
S-VIDEO IN Mini DIN 4-pin x 1 (S-Video)
AUDIO IN 1 RCA x 2 (L, R x 1), 0.5 Vrms
AUDIO IN 2 M3 x 1 (L, R x 1), 0.5 Vrms
AUDIO IN 3 M3 x 1 (L, R x 1), 0.5 Vrms
AUDIO OUT M3 x 1 (L, R x 1) (monitor out: 0-2.0 Vrms, variable)
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
REMOTE IN D-sub 9-pin (female) x 1 for external control (contact control)
LAN RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
WIRELESS MODULE Connector for optional wireless module ET-WM200 x 1
Power cord length 3.0 m (9 ft 10 in)
Power supply 100-240 V AC, 5.0-1.9 A, 50/60 Hz
Power consumption 415 W (500 VA) (0.3 W at 100-120 V AC, 0.4 W at 220-240 V AC with standby mode set to ECO*3, 15 W with standby mode set to NORMAL)
Dimensions (W x H x D) 332 x 168*4 x 484.5 mm (13-1/16˝ x 6-5/8˝ *4 x 19-1/16˝ ) (including the lens)
Weight Approximately 8.5 kg (18.7 lbs.)
Operating temperature 0°C-45°C (32°F-113°F)
Operating humidity 20%-80% (no condensation)
Supplied accessories Power cord with security lock, wireless remote control unit, batteries for remote control (AA type for North America, R6/LR6 type for Europe and Asia) x 2, wire rope, software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software Ver. 2, Wireless Manager ME 5.5)

buy projector,projector screen,Projector,projection system,hd projector,lcd projector,projector price,projector retail,projector shop,projector sale,digital signage,video wall,outdoor LCD display,indoor display,LED Display,HD Display system,multitouch screen