PT-DW11K 3 Chip DLP Projector

High brightness, picture quality and reliability – in a compact body
Our innovative dual-lamp system, with its new lamp, helps to make this body compact while providing a full 11,000lm of brightness, with 220-240V AC operation. When in ‘Lamp Relay’ mode, the system also eliminates any interruptions if a lamp should fail and enables 24/7 projection.

The projector’s Dynamic Iris feature uses a scene-linking aperture mechanism to achieve a remarkable 10,000:1 contrast without lowering its high brightness. This helps to reproduce deeper, richer blacks, and provides images with more detailed textures.

An integrated Eco Filter combines with the dust-resistant cabinet to allow long-term use in harsh conditions, while a maintenance cycle of up to 12,000 hours reduces the time and cost of repair.

The wide adjustment range of the powered horizontal/vertical lens shift function can be easily adjusted with the remote control. The unit can also be rotated 360° vertically, to accommodate various installation conditions. The lens-centred design contributes to easy installation.

  • High brightness and High contrast ratio of 10,000:1 makes bright, crisp and sharp image
  • Dual Lamp System with Lamp Relay mode enables 24/7 operation
  • Eco Filter enables up to 12,000 hours of Air filter replacement cycle.
  • 11,000 lumens brightness
  • WXGA(1366 x 768) resolution
  • 10,000:1 contrast ratio
  • Edge Blending Function and Color Matching
  • Portrait mode compatibility
  • Wired LAN
  • 3D ready
Model PT-DW11K PT-DZ10K
Power supply 120 V, 220-240 V AC, 50/60 Hz
Power consumption 120 V AC 980 W (1,010 VA) 925 W (1,010 VA)
(0.2 W with standby mode set to eco.*1
6 W with standby mode set to normal. Both with fan stopped.)
220-240 V AC 950 W (980 VA) 900 W (980 VA)
(0.3 W with standby mode set to eco.*1
9 W with standby mode set to normal. Both with fan stopped.)
Dissipation BTU 120 V: 3,345 BTU/hour
(without light output: 3,195 BTU/hour).
220–240 V: 3,242 BTU/hour
(without light output: 3,092 BTU/hour)
120 V: 3,157 BTU/hour
(without light output: 3,012 BTU/hour).
220–240 V: 3,072 BTU/hour
(without light output: 2,927 BTU/hour)
DLP™ chip Panel size 21.6 mm (0.85 in)
diagonal (16:9 aspect ratio)
24.4 mm (0.96 in)
diagonal (16:10 aspect ratio)
Display method DLP™ chip x 3, DLP™ projection system
Pixels 1,049,088 (1,366 x 768) x 3,
total of 3,147,264 pixels
2,304,000 (1,920 x 1,200) x 3,
total of 6,912,000 pixels
Lens Optional powered zoom/focus and fixed-focus lenses
Lamp 380 W UHM lamps (HIGH mode) x 2 355 W UHM lamps (NORMAL mode) x 2
Screen size (diagonal) 1.78 –25.4 m (70–1,000 in),
1.78 –15.24 m (70–600 in)
with the ET-D75LE8, 16:9 aspect ratio
1.78 –25.4 m (70–1,000 in),
1.78 –15.24 m (70–600 in)
with the ET-D75LE8, 16:10 aspect ratio
Brightness*2 11,000 lm*3 (dual-lamp) 10,600 lm (dual-lamp)
Center-to-corner uniformity*2 90 %
Contrast*2 10,000:1 (full on/off, with DYNAMIC IRIS set to “3”)
Resolution 1,366 x 768 pixels
(Input signals that exceed this resolution will
be converted to 1,366 x 768 pixels.)
1,920 x 1,200 pixels
Scanning frequency SDI 3G-SDI SMPTE ST 424 compliant,[RGB 4:4:4 12-bit /10-bit] 1080/50i, 1080/60i,
1080/25p, 1080/24p, 1080/24sF, 1080/30p[YPBPR 4:2:2 10-bit] 1080/50p, 1080/60p,
HD-SDI SMPTE ST 292 compliant,[YCBCR 4:2:2 10-bit] 720/50p, 720/60p,
1035/60i, 1080/50i, 1080/60i, 1080/25p,
1080/24p, 1080/24sF, 1080/30p
SD-SDI SMPTE ST 259 compliant,[YCBCR 4:2:2 10-bit] 480i, 576i
HDMI/DVI-D 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF,
1080/25p, 1080/30p, 1080/60p, 1080/50p, VGA (640 x 480)–WUXGA*4 (1,920 x 1,200),
compatible with non-interlaced signals only, dot clock: 25–162 MHz
RGB fH: 15–100 kHz, fV: 24–120 Hz, dot clock: 20–162 MHz
YPBPR(YCBCR)
fH: 15.75 kHz, fV: 60 Hz [480i(525i)] fH: 15.63 kHz, fV: 50 Hz [576i(625i)] fH: 45.00 kHz, fV: 60 Hz [720(750)/60p] fH: 33.75 kHz, fV: 60 Hz [1035/60i] fH: 28.13 kHz, fV: 50 Hz [1080(1125)/50i] fH: 27.00 kHz, fV: 24 Hz [1080/24p] fH: 33.75 kHz, fV: 30 Hz [1080/30p] fH: 56.25 kHz, fV: 50 Hz [1080/50p]
fH: 31.50 kHz, fV: 60 Hz [480p(525p)] fH: 31.25 kHz, fV: 50 Hz [576p(625p)] fH: 37.50 kHz, fV: 50 Hz [720(750)/50p] fH: 33.75 kHz, fV: 60 Hz [1080(1125)/60i] fH: 28.13 kHz, fV: 25 Hz [1080/25p] fH: 27.00 kHz, fV: 48 Hz [1080/24sF] fH: 67.50 kHz, fV: 60 Hz [1080/60p]
Video/Y/C fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift*5 Vertical ±70 % (±60 % with the ET-D75LE6)
from center of screen (powered)
±55 % (±44 % with the ET-D75LE6)
from center of screen (powered)
Horizontal ±30 % (±20 % with the ET-D75LE6)
from center of screen (powered)
±20 % (±15 % with the ET-D75LE6)
from center of screen (powered)
Keystone correction range Vertical: ±40°*6 Vertical: ±40°*6, horizontal: ±15°
Installation Ceiling/floor, front /rear, portrait*7
Terminals SDI IN BNC x 1 (3G/HD/SD-SDI)
3D SYNC IN/OUT BNC x 1 (3D timing signal)
3D SYNC OUT BNC x 1 (3D timing signal)
DVI-D IN DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
HDMI IN HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
RGB 1 IN BNC x 5 (RGB/YPBPR/YCBCR/YC x 1)
RGB 2 IN D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
VIDEO IN BNC x 1 (composite video)
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
SERIAL OUT D-sub 9-pin (male) x 1 for link control
REMOTE 1 IN M3 x 1 for wired remote control
REMOTE 1 OUT M3 x 1 for link control (for wired remote control)
REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)
LAN RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
Cabinet materials Molded plastic
Dimensions (W x H x D) 530 x 200*8 x 548.5 mm (20-7/8 x 7-7/8*8 x 21-19/32 in) (optional lens not included)
Weight*9 Approximately 24 kg (52.9 lbs) (optional lens not included)
Operation noise*2 45 dB (dual lamp operation with
lamp HIGH mode),
43 dB (dual lamp operation with
lamp MIDDLE mode),
37 dB (dual lamp operation with
lamp ECO mode)
43 dB (dual lamp operation with
lamp NORMAL mode),
37 dB (dual lamp operation with
lamp ECO mode)
Operating environment Operating temperature: 0–45°C (32–113°F)*10,
operating humidity: 10–80 % (no condensation)
Applicable software Logo Transfer Software, Multi Projector
Monitoring & Control Software
Supplied accessories Power cord with secure lock, wireless/wired remote control unit, batteries (R6/AA type x 2)

* Product numbers vary depending on the market. The general guideline is as follows: The product number in North America and Taiwan is
PT-DW11KU and PT-DZ10KU. The product number in Europe (except for those shipped directly to Europe), CIS, Asia (except Taiwan),
Oceania, Middle East, and Africa is PT-DW11KE and PT-DZ10KE.
The product number for the direct shipments to Europe is PT-DW11KEJ and PT-DZ10KEJ.

buy projector,projector screen,Projector,projection system,hd projector,lcd projector,projector price,projector retail,projector shop,projector sale,digital signage,video wall,outdoor LCD display,indoor display,LED Display,HD Display system,multitouch screen